

KLINGER®Graphite Laminate PSL
The pure graphite gasket with tanged sheet metal insert.
Made of expanded graphite with an insert of tanged stainless steel and featuring adhesive-free bonding. Furthermore, it is free of resins, impregnations, or other organic substances.
Basis composition
Expanded graphite with a 0.1 mm thick tanged stainless steel insert.
Areas of application
This gasket material is ideal for hot water and steam applications at temperatures of up to 400 °C, in which it displays no change to its physical properties.
Industries
General industry / Chemical / Oil & Gas / Energy / Pulp & Paper / Marine / Automotive

Typical technical data for thickness 2 mm
Density of the graphite layer |
DIN 28090-2 | g/cm3 |
1.10 |
Purity of Graphite |
DIN 51903 | % | > 99.0 |
Metallic reinforcement |
Tanged metal Thickness Number of sheets |
mm | AISI 316 (L) 0.10 1 |
Compressibility |
ASTM F 36 A | % | 35-45 |
Recovery |
ASTM F 36 A | % | 12-18 |
KLINGER cold/hot compression 50 MPa | Thickness decrease at 23°C Thickness decrease at 300°C |
% % |
35-45 1-3 |
Specific leak rate |
DIN 28090-2 | mg/ s x m°C | < 0.10 |
Chloride content of graphite layer |
DIN 28090-2 | ppm | ≤ 40 |
Function and durability
The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting - factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our installation manual.
Downloads
Below you can find more product-related information.
Industries who we work with







