

KLINGER® POLYSTRAT BT50-15
Polystrat BT50-15 is Noise absorbing shim for disc brakes.
Hard Steel shim with temperature- and pressure resistant rubber coating. One-sided adhesive coating and perfect damping performance.
Basis
NBR/Carbon Steel/NBR
Color
Black colour. Other per request.
Roll
Roll length up-to 500 m
Width
Up-to 500 mm
Composite and tolerances
Rubber mm NBR 0.200 +/- 0.010
Metal mm Cold rolled carbon steel 0.500 +/- 0.020
Rubber mm NBR 0.080 +/- 0.010
PS-Adhesive Acrylic 0.080 +/- 0.010
Release paper Siliconized 0.100 +/- 0.020
Total mm Without Release paper 0.660 +/- 0.050
Areas of application
Engines / Compressors / Brake systems / Automotive

Typical technical data and Properties for KLINGER® Polystrat
Max. creep relaxation |
ASTM F38 | % |
12 |
Adhesive bonding strength |
SAFT To steel plate |
°C N/mm |
100 - 150 ≥ 3 |
Bonding conditions |
Shim connection Temperature of back plate Pressure Pressure time |
°C MPa s |
≥ 20 2-3 5 |
Rubber hardness |
Shore A ISO 7619-1 | 70 - 75 | |
Compression |
ISO 815-1 | % | 25-27 |
Corrosion |
EKB 1102 | Grade | 0 |
Storage life (Higher storage temperature and or longer storage time may cause a quality decrease of the product) |
DIN 7716 | Months | 24 |
This information are based upon test results, but does not constitute a guarantee or warranty. The buyer must determine the suitability of the product for its purposes independently. In presenting possible uses for this product, no attempt has been made to investigate possible patent infringements. Therefore, the data may not, be used to support any warranty claims. This edition cancels all previous issues. Subject to change without notice.
Downloads
Below you can find more product-related information.